The C24 sign indicates a maximum permitted bogie load, which is the combined weight on closely spaced axles. This sign is crucial for protecting road infrastructure like bridges from damage caused by excessive concentrated loads. Drivers of heavy vehicles must ensure their bogie load does not exceed the value shown on the sign. If your vehicle exceeds this limit, you must not proceed and should seek an alternative route to avoid violating road regulations and potentially damaging infrastructure.
Learn the key details of the C24 - Maximum Bogie Load road sign, including its function, what it communicates to drivers, and how it applies in real traffic situations in Sweden. Use this overview to understand the sign clearly and recognise it confidently during the Swedish driving theory exam.
This sign sets a maximum permitted bogie load, meaning the combined load on a closely spaced set of axles (a bogie). It is used where road or bridge structures are sensitive to concentrated grouped axle loads. The value on the sign indicates the highest allowed bogie load. Vehicles exceeding this limit must not enter the restricted section and must use an alternative route. The restriction applies from the sign for the regulated section ahead.
Vehicles with a bogie load above the value shown are not allowed.
Get clear, practical answers to the most common questions about the C24 - Maximum Bogie Load road sign. Learn how the sign works, what rules it represents, and how it affects real driving situations. This FAQ strengthens your understanding and supports accurate decision making for the Swedish driving theory exam in Sweden.
The C24 sign means vehicles with a bogie load (the weight on a set of two or more axles close together) greater than the specified limit are prohibited from entering the restricted section. This is a restriction on the axle group weight, not necessarily the total vehicle weight.
This sign is primarily relevant for drivers of heavy goods vehicles and other large, heavy vehicles where the load distribution across axles is critical. Operators of such vehicles must be aware of their vehicle's bogie load capacity.
Ignoring the C24 sign can lead to damage to road structures such as bridges, which are often the reason for these restrictions. It can also result in fines and penalties for exceeding weight limits, and potentially cause safety hazards.
You should consult your vehicle's technical documentation or a certified weighbridge to determine the load on your bogie axles. Understanding your vehicle's axle group load limits is essential for safe and legal operation, especially when faced with signs like C24.
Not directly. While total vehicle weight is also regulated, the C24 sign specifically addresses the load concentrated on a bogie, which is a group of axles. Some vehicles might be under the total weight limit but exceed the bogie load limit, making this sign particularly important for them.
A clear reference image of the C24 - Maximum Bogie Load road sign used in Sweden.
The C24 - Maximum Bogie Load road sign may also be known by these alternative names or terms.
The C24 - Maximum Bogie Load road sign is part of the Prohibitory Signs (C) category, which groups together signs with similar rules and functions.