This section covers a diverse group of 'Other Road Devices' that provide crucial guidance and instructions not found on regular road signs or traffic signals. Understanding these signals, such as obstacle markers, hand signals, and barrier gates, is vital for reacting appropriately to hazards, navigating temporary road changes, and ensuring smooth traffic flow. Mastering these devices will enhance your road safety and help you pass your theory examination.
An explanation of how Other Road Devices (X) road signs apply in real traffic situations in Sweden. Learn where these signs are typically placed, what drivers are expected to do when they appear, and how correct reactions help you stay safe, avoid fines, and succeed in your Swedish driving theory exam.
You'll encounter 'Other Road Devices' in a variety of real-world driving scenarios. Obstacle markers (like X2 and X3) and marking arrows (X1) are frequently seen around road works, temporary obstructions, or unexpected changes in the road ahead, guiding you to pass safely. Yellow flashing arrows (X5) are common at roadworks or incidents to direct traffic flow, often indicating a lane closure or a change in path. Barrier gates (X7) are typically found at level crossings or temporary entry points, controlling access. Hand signals (X10, X11) from police officers or other authorised personnel are critical at junctions or during traffic disruptions where signals may not be operational or sufficient. Level crossing boards (X8) clearly indicate railway crossings, requiring extra caution. Roundabout centre markers (X9) help define the traffic island, and exit gore boards (X4) guide you at diverge points. Identification marks (X12) are used on wide vehicles or loads to make them more visible, especially from the front or rear.
An overview of the key learning outcomes when studying the Other Road Devices (X) road sign category. Understand the main concepts, sign meanings, and traffic situations covered here so you can recognise patterns, answer theory questions more confidently, and build a solid foundation for safe driving in Sweden.
Browse every road sign in the Other Road Devices (X) category. Each sign includes a clear meaning, purpose, and examples of how it is used in Sweden, helping you build strong recognition skills and a detailed understanding of this group of Swedish traffic signs.
Obstacle Marker Board (X2) Warns of Road Restrictions Ahead
Follow the Yellow Light Arrow: Your clear path guidance.
X8 Level Crossing Board: Enhancing Visibility at Rail Crossings
Understand the Traffic Controller's 'Proceed' Hand Signal (X11)
The X1 Marking Arrow warns you to steer sharply in the direction shown.
The X3 Marker Board warns you to adjust speed and position for side obstacles or road changes.
The X4 Exit Gore Board marks the crucial split for your motorway exit.
The X6 Special Warning Device alerts you to temporary road restrictions.
The X7 Barrier Gate Sign Means the Road Ahead is Closed
The X9 Roundabout Centre Marker guides you safely around the centre of a roundabout.
Understand the Stop Hand Signal (X10) from a Traffic Controller
The X12 Identification Mark sign means a special marking must be visible from both the front and the rear.
Clear answers to common questions about the Other Road Devices (X) road sign category. Use this FAQ to review tricky rules, understand how these signs appear in exam scenarios, and remove confusion that often leads to mistakes in the Swedish driving theory exam in Sweden.
'Other Road Devices' are supplementary to standard road signs and traffic signals. They often provide temporary guidance, highlight specific hazards, or convey instructions that are situation-dependent, such as hand signals from controllers or markers for roadworks. Standard signs are permanent fixtures conveying general rules, while these devices address immediate or specific traffic management needs.
Yellow flashing arrows, like the X5 sign, usually indicate a change in lane or a temporary lane closure, most commonly seen in roadworks or accident areas. You should slow down, observe the traffic around you, and be prepared to move into an open lane as directed by the arrows or other traffic control measures.
Hand signals from authorised personnel, such as police officers, take precedence over all other traffic signals and signs. If a controller gives a 'Stop' signal (X10), you must stop. If they give a 'Proceed' signal (X11), you may move forward when safe. Always make eye contact with the controller to ensure they are directing you specifically.
Many of these devices are temporary, used for roadworks, events, or unexpected situations. However, some, like level crossing boards (X8) and roundabout centre markers (X9), are permanent fixtures that are essential for safety in their specific locations. The context in which you see them will usually indicate whether they are temporary or permanent.
An obstacle marker board, such as the X2 or X3 signs, is used to draw your attention to a stationary object or hazard at or near the edge of the carriageway. They are typically striped and indicate that you must drive around the obstruction, paying close attention to the direction indicated by the markings.