The X2 Obstacle Marker Board is a crucial traffic sign in Sweden used to alert drivers to an obstruction on or near the road. This sign signifies that the available driving space is reduced, or that the road is partially or fully closed. It's essential to slow down, observe your surroundings, and be prepared to merge, pass cautiously, or follow detour instructions to navigate safely around the obstacle. When red and yellow, it specifically indicates temporary work-related obstructions.
Learn the key details of the X2 - Obstacle Marker Board road sign, including its function, what it communicates to drivers, and how it applies in real traffic situations in Sweden. Use this overview to understand the sign clearly and recognise it confidently during the Swedish driving theory exam.
The Obstacle Marker Board is used in Sweden to warn that traffic flow is limited due to a fixed or temporary obstacle on or beside the road. It highlights that the available carriageway has been reduced, and in some cases it signals that a road is fully or partly closed to traffic. This device helps drivers recognise an obstruction early and choose a safe path around it, often together with lane guidance or temporary routing. When it is used at roadworks or similar temporary work, it is coloured red and yellow to make it stand out and to indicate that the restriction is temporary and work related.
The road is restricted by an obstacle, and the board indicates that the roadway is narrowed or blocked. It can also indicate a full or partial road closure.
Get clear, practical answers to the most common questions about the X2 - Obstacle Marker Board road sign. Learn how the sign works, what rules it represents, and how it affects real driving situations. This FAQ strengthens your understanding and supports accurate decision making for the Swedish driving theory exam in Sweden.
The X2 Obstacle Marker Board signals that there is an obstacle ahead which restricts the normal flow of traffic. It indicates that the road width may be reduced or that there might be a partial or complete road closure. Always be prepared to adjust your driving accordingly.
Upon seeing the X2 Obstacle Marker Board, you must reduce your speed and pay close attention. Be ready to merge if the lane narrows, pass the obstacle carefully if there is space, or follow any alternative route or lane guidance provided. If the sign is red and yellow, it signifies temporary roadworks.
Common mistakes include continuing at normal speed into the restricted area, attempting to squeeze past an obstacle without sufficient space, or entering a section that is clearly blocked off. Always adhere to the restrictions indicated by the sign and any accompanying signage or traffic controllers.
A common exam trap is not recognizing that the X2 sign can mean a full or partial closure, not just a narrowing of the road. Learners might also fail to understand the urgency to slow down and prepare for alternative instructions, especially if the sign is part of a temporary traffic management setup for roadworks.
Not necessarily. The X2 sign indicates a restriction, which could be a narrowing, a merge, or a detour. It might also signal a full closure requiring you to stop or turn back. Always look for additional signs or instructions that clarify the exact nature of the restriction and the required action.
A clear reference image of the X2 - Obstacle Marker Board road sign used in Sweden.
The X2 - Obstacle Marker Board road sign may also be known by these alternative names or terms.
The X2 - Obstacle Marker Board road sign is part of the Other Road Devices (X) category, which groups together signs with similar rules and functions.